Dataq Instrument Port Devices Driver Download For Windo...

Return to site

Dataq Instrument Port Devices Driver Download For Windows

Dataq Instrument Port Devices Driver Download For Windows
Dataq Instrument Port Devices Driver Download For Windows 8.1
Reference Materials > Device Drivers and Device IDs
Previous | Next
Windows 7 drivers. Windows 7 is an operating system of Windows NT family which was released after Windows Vista but before Windows 8. According to the data on summer of 2017, Windows 7 is the most popular operating system in the world. According to the data on July, 2017, Windows 7 is used on 48.91% of all PCs worldwide.
Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port. To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

Dataq Instrument Port Devices Driver Download For Windows

Windows Version
Hardware9598NTME2000XP, VistaVista, 7, 8, 10
All Serial Devices1
N/ASame as XPN/AIt is not necessary to specify DeviceDriver for products using a physical COM port
DeviceID = 'COMnn DeviceName BaudRate'2
nn=COM port number3
DI-145, DI-148, DI-149, DI-155, DI-158, DI-245, DI-710, DI-715B, and DI-718B USB versions1
Only necessary with multiple devices
DeviceID = 'COMnn DeviceName BaudRate'2
nn=COM port number3
DI-220, DI-221, and DI-222
DeviceDriver = 'DI22nNT.DLL'
DeviceID = n
n = LPT#
DI-1100
N/A
DeviceDriver = 'DI30iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-1110
N/A
DeviceDriver = 'DI31iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-1120
N/A
DeviceDriver = 'DI33iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-2008
N/A
DeviceDriver = 'DI35iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-2108
N/A
DeviceDriver = 'DI32iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-2108-P
N/A
DeviceDriver = 'DI34iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first eight hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-4108, DI-4208, DI-4718B USB
N/A
DeviceDriver = 'DI36iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected DI-4208, DI-4108, or DI-1120 devices in order of decreasing model number and increasing serial number within each model, use '00000000'6
DI-4108, DI-4208, DI-4718B Ethernet
N/A
DeviceDriver = 'DI37iNT.DLL'
i = 07
DeviceID = Pointer to IP address or multiple IP addresses separated by commas (first item could be preceded by an unsigned 32-bit PublicKey for a ChannelStretch group and comma). WinDaq Dashboard uses the 32-bit time value in seconds since 1970 as a key.
DI-400, DI-401, and DI-410
DeviceDriver = 'DI40nNT.DLL'
DeviceID = n
n=WinRT virtual device #4
DI-710, DI-715B, and DI-718B, and DI-718Bx Ethernet versions
DeviceDriver = 'DI6nnNT.DLL'
nn =0 to 39 are reserved
40 to 69 for DI-710-E, DI-715B-E instruments
70-99 for DI-718B-E and DI-718Bx instruments5
DeviceID = IP address (example '192.168.1.0')
or
DeviceID = IP address:Port (for Remote Devices - example '192.168.1.0:10001')
DI-720/730/740/760-EN
DeviceDriver = 'DI8nnNT.DLL'
DeviceID = IP address (example '192.168.1.0')
nn = the order of WinDaq/IP installation - look in c:windowstpdataq.ini
DI-500/510/720/730/740/750/760-P
DeviceDriver = 'DI50nNT.DLL'
DeviceID = n
n = LPT#
Same as other systems for 32-bit versions, but N/A for 64-bit systems.
DI-720/730/740/760-USB
N/ASame as XP
N/ADeviceDriver = 'DI72nNT.DLL'
n =DeviceID = USB ID of the device
DI-700
N/ASame as XP
N/ADeviceDriver = 'DI70nNT.DLL'
n = DeviceID = USB ID of the device
1The DI-145, DI-148U, DI-149, DI-155, DI-158U/UP, DI-245, and DI-71x USB versions all use a virtual COM port. Some products use a virtual COM port even though they may have an alternate interface connection (like USB). Such products use the serial port device driver and ID. For a list of devices using a Virtual COM Port see Virtual COM Ports.
2DeviceName = Model number of the device. BaudRate = the baud rate. For a listing of baud rates see Baud Rate. For Example: For a DI-158U installed at COM 2 with 38400 Baud the DeviceID = 'COM2 158 38400'; a DI-145 installed at COM 8 would be: 'COM8 145 4800'.
3As specified during installation of the device. COM port numbers of 01 to 99 are supported. Example: For a Serial device installed to COM 1 the DeviceDriver=DI101NT.DLL. Go to Virtual COM Ports for instructions on finding the correct COM port.
4Virtual Device # can be found in c:Windowstpdataq.ini, or at the end of the WinDaq installation.
5The order of WinDaq/IP installation - look in title bar of WinDaq Acquisition when running device or check your installation directory for file(s) named WDQDK6nn.EXE.
6Starting WinDaq acquisition with V3.89 or later sets DLLName= and DeviceID= in the TPDATAQ.INI [Global] section, which become the default DeviceDriver and DeviceID if not set by a program using WinDaq.ocx or DataqSdk.ocx.
7Or other digit if using multiple unsynchronized devices or synchronized groups.
Top
Find your product below. 
Dataq Instrument Port Devices Driver Download For WindowsSome products use a virtual COM port even though they may have an alternate interface connection (like USB). Such products use the serial port device driver and ID. For a list of devices using a Virtual COM Port see Virtual COM Ports. 2 DeviceName = Model number of the device. BaudRate = the baud rate.
Universal WinDaq Software Installation*
Includes support for all contemporary data acquisition hardware products that support WinDaq software. Installs drivers and WinDaq recording and playback software. Also includes optional Add-on software with a valid installation key. Download the Drivers ONLY.

Windows Version
Hardware9598NTME2000XP, VistaVista, 7, 8, 10
All Serial Devices1
N/ASame as XPN/AIt is not necessary to specify DeviceDriver for products using a physical COM port
DeviceID = 'COMnn DeviceName BaudRate'2
nn=COM port number3
DI-145, DI-148, DI-149, DI-155, DI-158, DI-245, DI-710, DI-715B, and DI-718B USB versions1
Only necessary with multiple devices
DeviceID = 'COMnn DeviceName BaudRate'2
nn=COM port number3
DI-220, DI-221, and DI-222
DeviceDriver = 'DI22nNT.DLL'
DeviceID = n
n = LPT#
DI-1100
N/A
DeviceDriver = 'DI30iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-1110
N/A
DeviceDriver = 'DI31iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-1120
N/A
DeviceDriver = 'DI33iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-2008
N/A
DeviceDriver = 'DI35iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-2108
N/A
DeviceDriver = 'DI32iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-2108-P
N/A
DeviceDriver = 'DI34iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first eight hexadecimal characters of the device serial number
For a single device, or to open all connected devices in order of increasing serial number, use '00000000'6
DI-4108, DI-4208, DI-4718B USB
N/A
DeviceDriver = 'DI36iNT.DLL'
i = 07
DeviceID = 'nnnnnnnn'
nnnnnnnn = the first 8 hexadecimal characters of the device serial number
For a single device, or to open all connected DI-4208, DI-4108, or DI-1120 devices in order of decreasing model number and increasing serial number within each model, use '00000000'6
DI-4108, DI-4208, DI-4718B Ethernet
N/A
DeviceDriver = 'DI37iNT.DLL'
i = 07
DeviceID = Pointer to IP address or multiple IP addresses separated by commas (first item could be preceded by an unsigned 32-bit PublicKey for a ChannelStretch group and comma). WinDaq Dashboard uses the 32-bit time value in seconds since 1970 as a key.
DI-400, DI-401, and DI-410
DeviceDriver = 'DI40nNT.DLL'
DeviceID = n
n=WinRT virtual device #4
DI-710, DI-715B, and DI-718B, and DI-718Bx Ethernet versions
DeviceDriver = 'DI6nnNT.DLL'
nn =0 to 39 are reserved
40 to 69 for DI-710-E, DI-715B-E instruments
70-99 for DI-718B-E and DI-718Bx instruments5
DeviceID = IP address (example '192.168.1.0')
or
DeviceID = IP address:Port (for Remote Devices - example '192.168.1.0:10001')
DI-720/730/740/760-EN
DeviceDriver = 'DI8nnNT.DLL'
DeviceID = IP address (example '192.168.1.0')
nn = the order of WinDaq/IP installation - look in c:windowstpdataq.ini
DI-500/510/720/730/740/750/760-P
DeviceDriver = 'DI50nNT.DLL'
DeviceID = n
n = LPT#
Same as other systems for 32-bit versions, but N/A for 64-bit systems.
DI-720/730/740/760-USB
N/ASame as XP
N/ADeviceDriver = 'DI72nNT.DLL'
n =DeviceID = USB ID of the device
DI-700
N/ASame as XP
N/ADeviceDriver = 'DI70nNT.DLL'
n = DeviceID = USB ID of the device
1The DI-145, DI-148U, DI-149, DI-155, DI-158U/UP, DI-245, and DI-71x USB versions all use a virtual COM port. Some products use a virtual COM port even though they may have an alternate interface connection (like USB). Such products use the serial port device driver and ID. For a list of devices using a Virtual COM Port see Virtual COM Ports.
2DeviceName = Model number of the device. BaudRate = the baud rate. For a listing of baud rates see Baud Rate. For Example: For a DI-158U installed at COM 2 with 38400 Baud the DeviceID = 'COM2 158 38400'; a DI-145 installed at COM 8 would be: 'COM8 145 4800'.
3As specified during installation of the device. COM port numbers of 01 to 99 are supported. Example: For a Serial device installed to COM 1 the DeviceDriver=DI101NT.DLL. Go to Virtual COM Ports for instructions on finding the correct COM port.
4Virtual Device # can be found in c:Windowstpdataq.ini, or at the end of the WinDaq installation.
5The order of WinDaq/IP installation - look in title bar of WinDaq Acquisition when running device or check your installation directory for file(s) named WDQDK6nn.EXE.
6Starting WinDaq acquisition with V3.89 or later sets DLLName= and DeviceID= in the TPDATAQ.INI [Global] section, which become the default DeviceDriver and DeviceID if not set by a program using WinDaq.ocx or DataqSdk.ocx.
7Or other digit if using multiple unsynchronized devices or synchronized groups.
Top
Find your product below. 
Dataq Instrument Port Devices Driver Download For WindowsSome products use a virtual COM port even though they may have an alternate interface connection (like USB). Such products use the serial port device driver and ID. For a list of devices using a Virtual COM Port see Virtual COM Ports. 2 DeviceName = Model number of the device. BaudRate = the baud rate.
Universal WinDaq Software Installation*
Includes support for all contemporary data acquisition hardware products that support WinDaq software. Installs drivers and WinDaq recording and playback software. Also includes optional Add-on software with a valid installation key. Download the Drivers ONLY.
* Not compatible with: Windows XP, Vista, or special Windows 10S (Secure) version. Submit a Support Ticket for options.
Other SoftwareDataq Instrument Port Devices Driver Download For Windows 8.1Hardware model DI-159PLC Only
(Terminal Program)Hardware model DI-160 Only
(Stand-alone Event Recorder)Hardware model DI-161 Only
(Ethernet-based Event Recorder)

Windows Version
Hardware	95	98	NT	ME	2000	XP, Vista	Vista, 7, 8, 10
All Serial Devices¹	N/A	Same as XP	N/A	It is not necessary to specify DeviceDriver for products using a physical COM port DeviceID = 'COMnn DeviceName BaudRate'² nn=COM port number³
DI-145, DI-148, DI-149, DI-155, DI-158, DI-245, DI-710, DI-715B, and DI-718B USB versions¹	Only necessary with multiple devices DeviceID = 'COMnn DeviceName BaudRate'² nn=COM port number³
DI-220, DI-221, and DI-222	DeviceDriver = 'DI22nNT.DLL' DeviceID = n n = LPT#
DI-1100	N/A	DeviceDriver = 'DI30iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first 8 hexadecimal characters of the device serial number For a single device, or to open all connected devices in order of increasing serial number, use '00000000'⁶
DI-1110	N/A	DeviceDriver = 'DI31iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first 8 hexadecimal characters of the device serial number For a single device, or to open all connected devices in order of increasing serial number, use '00000000'⁶
DI-1120	N/A	DeviceDriver = 'DI33iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first 8 hexadecimal characters of the device serial number For a single device, or to open all connected devices in order of increasing serial number, use '00000000'⁶
DI-2008	N/A	DeviceDriver = 'DI35iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first 8 hexadecimal characters of the device serial number For a single device, or to open all connected devices in order of increasing serial number, use '00000000'⁶
DI-2108	N/A	DeviceDriver = 'DI32iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first 8 hexadecimal characters of the device serial number For a single device, or to open all connected devices in order of increasing serial number, use '00000000'⁶
DI-2108-P	N/A	DeviceDriver = 'DI34iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first eight hexadecimal characters of the device serial number For a single device, or to open all connected devices in order of increasing serial number, use '00000000'⁶
DI-4108, DI-4208, DI-4718B USB	N/A	DeviceDriver = 'DI36iNT.DLL' i = 0⁷ DeviceID = 'nnnnnnnn' nnnnnnnn = the first 8 hexadecimal characters of the device serial number For a single device, or to open all connected DI-4208, DI-4108, or DI-1120 devices in order of decreasing model number and increasing serial number within each model, use '00000000'⁶
DI-4108, DI-4208, DI-4718B Ethernet	N/A	DeviceDriver = 'DI37iNT.DLL' i = 0⁷ DeviceID = Pointer to IP address or multiple IP addresses separated by commas (first item could be preceded by an unsigned 32-bit PublicKey for a ChannelStretch group and comma). WinDaq Dashboard uses the 32-bit time value in seconds since 1970 as a key.
DI-400, DI-401, and DI-410	DeviceDriver = 'DI40nNT.DLL' DeviceID = n n=WinRT virtual device #⁴
DI-710, DI-715B, and DI-718B, and DI-718Bx Ethernet versions	DeviceDriver = 'DI6nnNT.DLL' nn =0 to 39 are reserved 40 to 69 for DI-710-E, DI-715B-E instruments 70-99 for DI-718B-E and DI-718Bx instruments⁵ DeviceID = IP address (example '192.168.1.0') or DeviceID = IP address:Port (for Remote Devices - example '192.168.1.0:10001')
DI-720/730/740/760-EN	DeviceDriver = 'DI8nnNT.DLL' DeviceID = IP address (example '192.168.1.0') nn = the order of WinDaq/IP installation - look in c:windowstpdataq.ini
DI-500/510/720/730/740/750/760-P	DeviceDriver = 'DI50nNT.DLL' DeviceID = n n = LPT#	Same as other systems for 32-bit versions, but N/A for 64-bit systems.
DI-720/730/740/760-USB	N/A	Same as XP	N/A	DeviceDriver = 'DI72nNT.DLL' n =DeviceID = USB ID of the device
DI-700	N/A	Same as XP	N/A	DeviceDriver = 'DI70nNT.DLL' n = DeviceID = USB ID of the device

Dataq Instrument Port Devices Driver Download For Windows

Dataq Instrument Port Devices Driver Download For Windows

Universal WinDaq Software Installation*

Dataq Instrument Port Devices Driver Download For Windows

Universal WinDaq Software Installation*

Other Software

Dataq Instrument Port Devices Driver Download For Windows 8.1

Hardware model DI-159PLC Only(Terminal Program)

Hardware model DI-160 Only(Stand-alone Event Recorder)

Hardware model DI-161 Only(Ethernet-based Event Recorder)

Hardware model DI-159PLC Only
(Terminal Program)

Hardware model DI-160 Only
(Stand-alone Event Recorder)

Hardware model DI-161 Only
(Ethernet-based Event Recorder)